GSE Scale Systems 460/465 Indicator - equipped with the industries most sophisticated parameter map and programmable features

GSE 460/465 Indicator

Designed to outperform and outlast all comparable indicators, the Model 460 and 465 offer unparalleled performance and value. Equipped with the industries most sophisticated parameter map and programmable features, the 450 series indicators deliver easy to use operation with the flexibility to meet your application requirements now and in the future.

Features

Macros - 15 programmable macros, applies the principles of boolean logic in a sequential structure, provides a method of performing repetitive keystrokes and operations, simplifies indicator use by automating indicator operation
Database - 15 programmable databases are used to manage critical application data, this powerful feature stores weight information and other user defined Data Registers such as part numbers, formulas, etc., 18 functions include store, recall, sort, upload
Data Registers - 15 programmable data registers can be defined as an integer, unsigned integer, float or string, common data registers include part number, lot #, Operator ID, commodity code, etc.
Communications - a facotry default transmission will send: Gross, net and tare weights. Using the Custom Transmit Tables, other transmissions may be programmed to send weight data, Data Registers or ASCII control codes for application specific labels, reports, etc.
Input Interpreter Tables are programmed to recieve RS232 serial data and perform a specific task, ie. a bar code scanner scans a formula #, the data is received into an input interpreter table and invokes a macro that recalls target weights.
Enclosure - NEMA 4X (IP66), stainless steel, also available in panel mount
Display - bright 6 digit .75" (20.3mm) Vaccum Fluorescent (VFD) with 2.5 (10 character) dot matrix for scale status and operator prompting

APPLICATIONS

Truck Weighing
Average Piece Weight (APW) Recall
Remote Display Mode
Checkweigh
Batching

Performance
Resolution	100,000d (+/-500,000 internal)
A/D Conversion	60 Hz
Flash Memory	1M Bytes
Calibration	Selectable, 5 point linearization or enter L.C. mV/V F.S.
A/D Filterin	GSE FIR (Finite Input Response) Filter with selectable display update rate
Units of Measure	4 user defined per scale
Custom Units	2 user defined per scale (ie. Tons)
Zero Adjustment	Selectable, 0.01 - 100% F.S.
Span Adjustment	0.1 - 20mV/V
Non-Linearity	0.005%FS, L.C. Dependent
Operating Temp	-10^oC -+40^oC
Excitation Power	12 -350 ohm bridges
Input Signal Connect	4 or 6 conductors with sense leads
Excitation Current	350 mA, short circuit protected
Excitation Voltage	10VDC short circuit protected
Time/Date Clock	Volatile, battery backed optional
Warranty	2 Year limited

Electrical
Power Input	AC, 90 - 250VAC, 50/60Hz
Fuse	0.5A Slo-Blow (when using AC power)

Setpoint I/O
I/O Scan Rate	16ms maximum
Number of I/O	8 physical I/O maximum, optional 16 tOTAL (8 physical, 8 logical)
Output Voltage Rating	20 - 240 VAC 1A 30 - 60 VDC 2A
Input Voltage Rating	60 - 135 VAC 200 - 250 VAC 3 - 30 VDC
I/O Timer Resolution	10ms
Remote Contact Input	2 total for TARE, PRINT, START, STOP, etc. Invokes macros 6 & 7 if programmed

Communications
Port 1	RS232 Full Duplex or Optional RS485 Multi-drop Optional 20mA Current Loop
Port 2	RS232 Full Duplex, no RTS on COMM 2
Protocols	Modbus^TM(DeviceNet^TM, Profibus, opt.) DeviceNet^TM up to 500k Baud ODVA Approved. Profibus up to 12M Baud PTO Approved. DeviceNet^TM and Profibus mount in SBM slot and use COMM 1
Baud Rates	150 - 58,300 bps
Custom Transmit Tables	4 - user defined RS232 output tables
Input Interpreter Tables	15 - user defined RS232 input tables

Options and Accessories
Multi-Scale Module	allows for simultaneous monitoring of an additional signal input
Analog Output Module	isolated 16-bit signal output, 0-10VDC, 0-20mA or 4-20mA, software adj. zero/gain (2 analog modules max)
I/O Relay Module	8 Variations of Quad I/O boards. (AC & DC - 4 Output, 4 Input or 2 In/2 Out) only one option mounts inside the enclosure.
RS485 Module	isolated serial communication module replaces RS232 on Port 1, multi-drop wit 251 devices max, half or full duplex up to 4000 feet, 56K bps max
20mA Current Loop	isolated serial communication module replaces R232 on Port 1, TX- Active or Passive, RX-Passive, 9600 bps max, 12 VDC, 1000 foot loop
Alpha Keyboard	allows alpha character entry into data registers such as Product Name, Part Number, etc.
Dura-Shild	0.020" layer of weatherable lexan film with adhesive backing, applies to the front of the indicator, keeps display and keyboard clean in extreme environments
GSE ReFlash Software	download firmware enhancements via RS232 port
BDM Flash Software	download firmware enhancements via BDM port
DiveceNet^tm	allows the indicator to be a slave divece on the network - ODVA approved
Profibus	DP allows the indicator to be a slave device on the network - PTO approved