GSE 560/562 Indicator - equipped with comprehensive parameter map, programmable features and a multitude of option mudules

GSE 560/562 Indicator

The Model 560 and 562 offers unparalleled performance in a mid range weight indicator. Equipped with a comprehensive parameter map, programmable features and a multitude of option mudules, the 560 series is the indicator of choice for applications that require value, quality and performance.

Features

Macros - 100 programmable macros, applies the principles of boolean logic in a sequential structure, provides a method of performing repetitive keystrokes and operations, simplifies indicator use by automating indicator operation
Database - 100 programmable databases are used to manage critical application data, this powerful feature stores weight information and other user defined Data Registers such as part numbers, formulas, etc., 18 functions include store, recall, sort, upload, etc.
Data Registers - 100 programmable data registers can be defined as an integer, unsigned integer, float or string, common data registers include part number, lot #, Operator ID, commodity code, etc.
Communications - a facotry default transmission will send: Gross, Net and Tare weights. Using the Custom Transmit Tables, other transmissions may be programmed to send weight data, Data Registers or ASCII control codes for application specific labels, reports, etc.
Input Interpreter Tables are programmed to recieve RS232 serial data and perform a specific task, ie. a bar code scanner scans a formula #, the data is received into an input interpreter table and invokes a macro that recalls target weights.
Enclosure - NEMA 4X (IP66), stainless steel with swivel bracket or panel mount
Remote Display - allows indicators to operate as a remote display (slave device)

APPLICATIONS

Truck Weighing
Average Piece Weight (APW) Recall
Checkweigh
Batching

Performance
Full Scale (F.S.)	Selectable 0 to 999,990
A/D Conversion	60 Hz
Resolution	100,000d (+/-500,000 internal)
Flash memory	1M Bytes
Calibration	Selectable, 5 point linearization or enter Load Cell mV/V full scale
A/D Filtering	GSE Fir (Finite Input Response) filter with selectable display update rate
Units of Measure	4 user selectable per scale
Custom Units	2 user defined per scale
Zero Adjustment	Selectable, 0.01 - 100% F.S.
Span Adjustment	0.1 - 20 mV/V
Non - Linearity	0.005% F.S., L.C. dependent
Operating Temp	-10^oC to +40^oC
Excitation Power	14 - 350 ohm bridges
Input Signal Connect	4 or 6 conductors with sense leads
Excitation Current	400 mA, short circuit protected
Excitation Voltage	10 VDC, short circuit protected
Time/Date Clock	Non-volatile, battery backed
Database Memory	4K standard, expandable to 8K or 156K
Warranty	2 year limited

Electrical
Power Requirement	AC, 90-250 VAC, 50/60 Hz; DC, 10-32 VDC
Fuse	0.8A Slow - Blow (when using AC power)

Setpoint I/O
I/O Scan Rate	16ms maximum
Number of I/O	48 total (32 physical - optional, 16 logical - software)
Remote Contact Input	2 total for TARE, PRINT, START, STOP, etc. Invokes macros 6 & 7 if programmed

Communications
Port 1	RS232 Full Duplex, RS485 or 20 mA optional
Port 2,3	RS232 Full Duplex, no RTS on Comm 3
Protocols	Modbus^TM RTU, ASCII, Device Net (optional) Profibus (optional)
Custom Transmit Tables	100 - user defined RS232 output tables
Input Interpreter Tables	100 - user defined RS232 input tables
Baud Rate	150-58,300 bps

Physical
Keypad	22 Key, durable elastomeric rubber
Standard Size	11.01" W (27.98 cm) x 8.96" H (22.76 cm)
Weight	7lb (3.18kg)
Panel Mount Cutout	9.00/9.25" W (22.86/23.5 cm) x 8.00/8.25" H (20.32/20.96 cm)

Options and Accessories
Note: 2 serial bus module [SBM] and 1 communication module mount internat to the enclosure.
Multi-Scale Module^[SBM]	Up to 3 additional signal inputs (simultaneously monitored)
Analog Output Module^[SBM]	isolated 16-bit signal output, 0-10 VDC, 0-20 mA or 4-20 mA, software adjust zero/gain (4 analog modules max)
I/O Relay Module	8 variations of Quad I/O boards^[SBM] or 16 position I/O boards
RS485 Module	Replaces comm port 1, Isolated multi-drop with 251 devices max, half or full duplex up to 4000 feet, 56K bps max
20 mA Current Loop	Replaces comm port 1, Isolated TX-Active or Passive, RX-Passive, 9600 bps max, 12 VDC, 1000 foot loop
Device Net Module	ODVA approved Interface module for fieldbus networking, [SBM] footprint mounting
Profibus	PTO approved interface module for fieldbus networking, [SBM] footprint mounting
Database Module	256K Ram, battery backes. Store critical application data
Alpha Keyboard	Allows alpha character entry. Uses standard keyboard with GSE SCK adapter
ReFlash software	download firmware enhancements and updates
Dura-Shild	Weatherable lexan film covers keypad and display for extreme environments