Destination
Enter destination to get a shipping cost
Use the LaserLT-60 and LaserLT-100 remote displays to clearly display weight information at distances up to 150 feet. The displays are ideal for applications where weight needs to be viewed from a distance. Both the LaserLT-60 and the LaserLT-100 operate with a range of weight indicators to easily integrate with any system. The incoming format can be interfaced through a set function or with a manual setup.
The LaserLT-60 and LaserLT-100 are designed for indoor, outdoor and washdown applications. With adjustable brightness, the six-digit, seven-segment character LED displays are easy to read even in direct sunlight.
The stainless steel enclosure is weathertight with an IP68 rating. With a standard anti-condensation air valve regulating humidity and pressure, these displays are protected for outdoor use. The LaserLT-60 and LaserLT-100 are easy to mount with standard back brackets or optional side-mounting brackets. The back brackets have a 15-degree angle for clear visibility from below and side-mounting brackets can be used to support, hang or wall mount the remote display.
With SCT-1100 firmware loaded, configurable as a weight indicator
Indicators are not Legal for Trade, NTEP approval pending.
Order Now or Call an Industrial Scale Specialist Toll Free at 877-65-SCALE !
DISPLAY | 6-digit, 7-segment discrete oval red LED lamps, single width 2.4 in (60mm) or 4 in (100mm) digit Decimal/comma indication in any position Annunciators for NT, Stability, COZ |
---|---|
MAXIMUM VIEWING DISTANCE | LaserLT-60: 2.4 in digit 75 ft (25m) LaserLT-100: 4 in digit 150 ft (50m) |
INPUT INTERFACE | RS-232, RS-485 |
INPUT DATA FORMAT | Baud Rate: 1200 to 115.2 K software selectable. Even parity 7 data bits, or no parity 8 data bits |
POWER | 12-24VDC/ 110-240VAC |
Destination
Enter destination to get a shipping cost